VARIAN INFINITY PLUS 500WB
INFINITY PLUS 500 WB NMR SYSTEM SPECIFICATIONS FROM THE MANUFACTURER'S QUOTE
The specifications from the manufacturer's quote are given below. NOTE: Only the console specifications are given, as the magnet was part of a Varian Unity Inova 500WB spectrometer. The console was upgraded to an Infinity Plus console in 2002.
INFINITY PLUS 500WB SOLIDS NMR CONSOLE
- INFINITY PLUS 500WB SOLIDS FT NMR Console:
- All RF channels include:
- RF pulse shaping with amplitude and phase modulation
- Computer-controlled phase shifts in 90° and 0.25° steps
- 60-dB computer-controlled linear amplitude modulation in 4096 steps
- 79-dB computer-controlled amplitude scaling in 1 dB steps
- 10-nsec resolution digital pulse programmer
- One digital pulse programmer per RF channel
- On-board Motorola DSP processor and memory
- Automated observe channel selection
- Motorola 68040 acquisition computer
- Ethernet TCP/IP interface to Sun Microsystems workstation
- Real-time operating system, 8MByte memory
- Wideband receiver system
- 10-ns resolution data acquisition controller
- 16 MByte data acquisition memory
- 14-bit ADC's, 8 MHz maximum data sampling rate in quadrature
- Computer-controlled quasi-elliptical anti-aliasing filters
- 1 kHz to 256 kHz in 1 kHz steps
- Computer-controlled, fast recovery Bessel antialiasing filters
- 500 kHz, 1 MHz, 2 MHz, 2.5 MHz
- Spinsight NMR Applications Software
- UNIX operating system
- X-Windows and Motif user interface
- Complete set of Varian manuals and documentation
- 1-year Warranty
- Additional RF Amplifier Cabinet, Infinity Plus, Required for 4-RF channel configurations
- Dual Fullband RF System, Infinity Plus
- Two RF Channels with observe, pulse, and decouple functions
- RF channel frequency range: 20-600 MHz,
- 0.1 Hz frequency resolution
- 3rd and 4th RF Channel, 20-300 MHz Infinity Plus
- Two RF channels with observe, pulse and decouple functions
- RF channel frequency range: 20-300 MHz
- 0.1 Hz frequency resolution
- RF Attenuator Module, 3 and 4 channel
- Provides four 79 dB RF attenuators, one for each RF channel up to four RF channels
- Automated MAS Controller, 200-500 MHz
Provides automated MAS speed control,
including start, stop and rotor synchronization
Optional manual spinning contorl, user selectable.
Compatible with Varian Chemagnetics PENCIL
MAS solid-sample probes.
Compatible with INOVA and Infinity Plus solids systems. - Solids Upper Stack, 200-600 MHz WB, Infinity Plus/INOVA
Required for Varian/Chemagnetics VT solid-sample probes
Compatible with Varian Extended Range Variable Temperature Unit
Operating temperature range: -150°C to +250°C. - Extended Range Variable Temperature Unit, Infinity Plus
Provides computer-controlled sample temperature management,
from -150°C to +250°C with 0.1°C resolution. Compatible with
all Varian and Varian/Chemagnetic solid-sample probes. - Remote Status Module with 40 ft (12.2 m) Cable
Includes LED displays for VT setting and pulse,
decoupling, acquisition, WFG, and PFG gates. - 1H/19F RF Amplifier Channel, 500 MHz, 800 Watt, Infinity Plus
- Frequency range: 19F-1H, manual tuning
- Class AB or class C operation, customer-selectable
- Includes high power, low noise, GaAs FET preamplifier
for 19F/1H with active T/R switch.
- Broadband RF Amplifier Module, 6-220 MHz, 1000 W, Infinity Plus 500
- Frequency range: 6-220 MHz
- Output power: 1000 watts pulsed, 100 watts CW
- Includes high power, low noise, fast recovery,
passively-switched preamplifier.
- Broadband RF Amplifier Module, 10-130 MHz, 1000 W, Infinity Plus 500
- Frequency range: 10-130 MHz
- Output power: 1000 watts pulsed, 100 watts CW
- Includes high power, low noise, fast recovery,
passively-switched preamplifier.
- Directional Coupler Module, 3-channel, 100-800 MHz
- p/n M806681000 HF Filter Set, 500 MHz
- p/n M806688000 500 MHz Filter Kit, Solids Triple Resonance
- 3.2mm Triple Resonance HFX MAS Solids Probe, 500 MHz
Reference specification document HFX500.doc - 3.2mm Triple Res HCN MAS Balun Solids Probe
Vespel Spin Module, VT, 500WB
Reference spefication document HCN500_balun.doc - Gradient Driver for Infinity Plus
- Optimised for gradient MAS applications. Delivers 80A to
compatible Chemagnetics probe. - Includes cabinets and cables
- Optimised for gradient MAS applications. Delivers 80A to
- 3.2mm Quad Resonance HCDN MAS Solids Probe, VT, 500WB
- Does not include HXY filters for any TR or QR experiments
- Reference specification document HCDN5001.doc
- 3.2mm Double Resonance HX MAS Gradient Probe, VT, 500WB
Reference specification document HX500_gradient.doc - P/N MSPA003018 - Rotor Assembly, 3.2mm Large Volume
- P/N MPRA000043 - Large Volume Starter Kit
- Enhanced Shims - 26 channel shim power supply
